User Manual Q&AAnswer
Jan 04, 2025 - 01:30 AM
To connect your Epson EMP1985WU PowerLite LCD 1080p Projector to your computer, follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the computer video cable (VGA cable) that came with your projector.
3. Connect one end of the VGA cable to the VGA port on the back of the projector.
4. Connect the other end of the VGA cable to the VGA port on your computer.
5. If your computer has multiple video outputs, make sure to select the correct input source on the projector. You can do this by pressing the "Source Search" button on the projector's control panel or remote control until the VGA input is selected.
6. Turn on your computer and then turn on the projector.
7. Your computer's display should now be mirrored on the projector screen. If not, you may need to adjust the display settings on your computer.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the Epson EMP1985WU PowerLite LCD 1080p Projector.
Add New Comment