How do I program the channels on my Mag One By Motorola BPR40 UHF 4 Watt 8 Channel radio? (Motorola SOLUTION BPR40 UHF 4W Radios User Manual)

Answer

manuals.plus

Jan 04, 2025 - 01:00 AM


To program the channels on your Mag One BPR40 radio, follow these steps:

1. Turn on the radio by rotating the power/volume  xxxx  clockwise.
2. Press the "Menu" button to enter the menu mode.
3. Use the channel selector  xxxx  to navigate to the "Program" option and press the "Menu" button to select it.
4. The display will show the current channel number. Use the channel selector  xxxx  to choose the desired channel you wish to program.
5. Press the "Menu" button to confirm the channel selection.
6. The display will show the current frequency. Use the channel selector  xxxx  to set the desired frequency for the selected channel.
7. Press the "Menu" button to confirm the frequency selection.
8. The display will show the current PL code (if enabled). Use the channel selector  xxxx  to choose the desired PL code or set it to "Off" if not required.
9. Press the "Menu" button to confirm the PL code selection.
10. The display will show the current DPL code (if enabled). Use the channel selector  xxxx  to choose the desired DPL code or set it to "Off" if not required.
11. Press the "Menu" button to confirm the DPL code selection.
12. Repeat steps 4 to 11 for each channel you want to program.
13. Once you have finished programming the channels, press the "Menu" button to exit the programming mode.

Please note that the above instructions are a general guideline. For more detailed information and specific options, refer to the user manual provided with your Mag One BPR40 radio.