User Manual Q&AAnswer
Jan 03, 2025 - 11:52 PM
To set the time on the NAXA Electronics NRC-175 Alarm Clock Radio, please follow these steps:
1. Make sure the AC cord is connected to a wall outlet with AC 120V/60Hz power supply.
2. Press the ON/OFF button (#3) to turn on the unit. The unit will default to the "Radio" station.
3. Press the TIME-SET button (#5) to select the desired time format (12-hour or 24-hour).
4. Long press the TIME-SET button (#5) to enter the time setting mode. The time on the display will flash.
5. Use the REV/MIN button (#10) to adjust the minutes and the FWD/HR button (#11) to adjust the hours. You can also long press these buttons for quick adjustment.
6. After adjusting the time, press the TIME-SET button (#5) again to save the time.
7. The clock is now set.
Please note that if the unit is turned off, the time will be retained using a 3V battery (not included) for backup. If the battery is not installed or is dead, the time will need to be set again when the unit is turned on.
For more detailed instructions and information, please refer to the NAXA Electronics NRC-175 Alarm Clock Radio Instruction Manual.
Add New Comment