User Manual Q&AAnswer
Jan 03, 2025 - 11:51 PM
To connect the Polk Audio AW2365-A in-wall speaker to your audio system, you will need to follow these steps:
1. Ensure that your audio system is turned off and unplugged.
2. Locate the speaker wire terminals on the back of the in-wall speaker.
3. Strip the ends of your speaker wire to expose the bare wire.
4. Insert the bare wire into the corresponding speaker wire terminals on the in-wall speaker. The terminals are typically labeled as "+" and "-".
5. Tighten the terminals to secure the speaker wire in place. Ensure that there is a secure connection and no loose wires.
6. Repeat the above steps for any additional in-wall speakers you wish to connect.
7. Once all the speakers are connected, connect the other end of the speaker wire to the corresponding speaker outputs on your audio system. Ensure that the polarity (+/-) is matched correctly.
8. Double-check all connections to ensure they are secure.
9. Power on your audio system and test the sound from the in-wall speakers.
Please refer to the product manual for more detailed instructions and illustrations on connecting the Polk Audio AW2365-A in-wall speaker to your audio system.
Add New Comment