How do I pair the Audio-Technica ATH-CKR300BTBL Wireless Headphones with my Bluetooth device? (audio-technica ATH-CKR300BTBL Wireless Headphones User Guide)

Answer

manuals.plus

Jan 03, 2025 - 11:38 PM

To pair the Audio-Technica ATH-CKR300BTBL Wireless Headphones with your Bluetooth device, please follow these steps:

1. Make sure the headphones are turned off. If they are already turned on, turn them off by sliding the power switch to the "OFF" position.

2. Turn on your Bluetooth device (e.g., smartphone, tablet) and navigate to the Bluetooth settings.

3. Place the Bluetooth device within 1 meter (3.3 feet) of the headphones to ensure a successful pairing process.

4. On the headphones, slide the power switch to the "ON" position. The indicator light on the headphones will start flashing white.

5. On your Bluetooth device, search for available Bluetooth devices. The headphones should appear as "ATH-CKR300BT" in the list of available devices.

6. Select "ATH-CKR300BT" on your Bluetooth device to initiate the pairing process.

7. If prompted, enter the passkey "0000" on your Bluetooth device. This passkey may also be referred to as a passcode, PIN code, PIN number, or password.

8. Once the pairing is successful, you will hear a confirmation tone from the headphones, and the indicator light will stop flashing and remain solid white.

9. The headphones are now paired with your Bluetooth device. You can start using them to listen to music, make phone calls, and more.

Note: If you have multiple Bluetooth devices, the headphones support multipoint connection, allowing you to connect two devices simultaneously. Refer to the user manual for instructions on how to set up multipoint connection.

For more detailed information and troubleshooting tips, please refer to the user manual provided with the Audio-Technica ATH-CKR300BTBL Wireless Headphones.