User Manual Q&AAnswer
Jan 03, 2025 - 10:53 PM
To mount the Ubiquiti Networks UAP-FlexHD UniFi FlexHD on a drop tile ceiling, you will need the optional Ceiling Mount, Mount Cover, and Back Plate Assembly. Here are the step-by-step instructions:
1. Use the base of the Ceiling Mount as a template to mark the diameter of the hole where the UAP FlexHD will be installed. Then, cut along the marked line to make a hole in the ceiling tile.
2. Slide the Ceiling Mount through the hole and secure it to the ceiling tile by attaching the Back Plate Assembly to the Ceiling Mount.
3. Pass the Ethernet cable through the Ceiling Mount and connect it to the Ethernet port on the UAP FlexHD.
4. Slide the UAP FlexHD all the way up into the Ceiling Mount until it snaps into place.
5. Attach the magnetic cover to the base of the ceiling mount.
With these steps, you should be able to properly mount the UAP-FlexHD on a drop tile ceiling. For more detailed instructions and illustrations, please refer to the user manual provided by Ubiquiti Networks.
Add New Comment