User Manual Q&AAnswer
Jan 03, 2025 - 10:52 PM
To connect the Victrola VM-110C Acrylic Turntable to wireless speakers, you will need to follow these steps:
1. Set up the wireless speakers: Insert the AC/DC Adaptor plug into the DC Cable Splitter and plug each end of the DC Cable Splitter into the DC IN Jack of each speaker. Plug the AC/DC Adaptor into a wall outlet and charge the speakers for about 5-6 hours, or until fully charged.
2. Turn on both speakers and wait for a quick audible beep from each speaker.
3. Identify the Main Speaker by looking for the BT-PHONO Switch on the back of one speaker.
4. Move the BT-PHONO Switch to the BT position.
5. Make sure Bluetooth is enabled on your device and select "VM-100" from your device's Bluetooth menu to pair your device with the speakers.
6. An audible beep will sound once pairing is successful.
7. Control the functions and volume from either speaker or from your paired device.
Please note that the speakers need to be close to each other for pairing, and you may need to repeat the pairing process if the speakers are turned off or disconnected.
Add New Comment