User Manual Q&AAnswer
Jan 03, 2025 - 10:37 PM
To connect your Pyle PVNT7U Retro Style Turntable to external speakers, you will need to use the RCA out jacks on the turntable. Here's how to do it:
1. Locate the RCA out jacks on the back of the turntable. These are usually labeled as "RCA Out" or "Line Out."
2. Get an RCA cable with the appropriate length to reach your external speakers. The cable should have RCA plugs on both ends.
3. Connect one end of the RCA cable to the RCA out jacks on the turntable. Make sure to match the red plug to the red jack and the white (or black) plug to the white (or black) jack.
4. Connect the other end of the RCA cable to the input jacks on your external speakers. Again, match the red plug to the red jack and the white (or black) plug to the white (or black) jack.
5. Once the connections are made, turn on your external speakers and set the volume to an appropriate level.
6. Set the turntable's volume control to a low level to start with.
7. Play a record on the turntable and gradually increase the volume on both the turntable and the external speakers until you reach the desired listening level.
By following these steps, you should be able to connect your Pyle PVNT7U Retro Style Turntable to external speakers and enjoy your vinyl records with enhanced audio quality.
Add New Comment