User Manual Q&AAnswer
Jan 03, 2025 - 10:04 PM
To connect your Pyle PTA62BT amplifier to your speakers, follow these steps:
1. Identify the speaker terminals on the back of the amplifier. They are labeled as "Push Type Speaker L/R Terminals."
2. Strip the ends of your speaker wires to expose the bare wire.
3. Insert the bare wire into the corresponding speaker terminal on the amplifier. The positive (+) wire should be connected to the red terminal, and the negative (-) wire should be connected to the black terminal.
4. Tighten the terminals to secure the speaker wires in place. Make sure the connections are tight to ensure good audio quality.
5. Repeat the process for each speaker you want to connect to the amplifier.
Note: Make sure to observe proper polarity when connecting the speakers. The positive (+) wire should always be connected to the positive terminal, and the negative (-) wire should be connected to the negative terminal.
For more detailed instructions and illustrations, refer to the "Back Panel" section in the user manual of the Pyle PTA62BT amplifier.
Add New Comment