User Manual Q&AAnswer
Jan 03, 2025 - 09:09 PM
To connect your HP M182-M185 Color LaserJet Pro MFP to a wireless network, please follow these steps:
1. Ensure that your printer is turned on and in a ready state.
2. On the printer control panel, touch the wireless icon to open the Wireless menu.
3. In the Wireless menu, touch the Setup option.
4. Select the Wireless Setup Wizard option.
5. The printer will search for available wireless networks. Wait for the list to populate.
6. Select your wireless network from the list.
7. If prompted, enter the network password using the printer's control panel.
8. After entering the password, touch Done or OK to confirm.
9. The printer will attempt to connect to the wireless network. This may take a few moments.
10. Once the connection is established, the printer will display a confirmation message.
Please note that the above steps are a general guideline, and the exact steps may vary slightly depending on the specific model and firmware version of your HP M182-M185 Color LaserJet Pro MFP. For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the product.
Add New Comment