User Manual Q&AAnswer
Jan 03, 2025 - 09:07 PM
To adjust the stimulation level on the Educator E-Collar, follow these steps:
1. Turn on the Transmitter and make sure the collar receiver is turned off.
2. Set the intensity dial to "0" on the Transmitter.
3. Put the red dot on the Transmitter against the red dot on the Collar Receiver for more than 5 seconds until the green light changes from solid to a rapidly flashing green light.
4. While the indicator light on the Collar Receiver is rapidly blinking, rotate the dial on the Transmitter to increase or decrease the stimulation level. Rotating clockwise increases the stimulation level, and rotating counterclockwise lowers the stimulation level.
5. Once you have set the desired stimulation level, press the stimulation button again to save and exit the stimulation level adjustment mode.
It is important to find the correct stimulation level for your dog. Start with a low level and gradually increase it until your dog responds. It is recommended to practice changing levels and modes before putting the collar receiver on your dog. Always use the least amount of stimulation necessary to get your dog's attention. If you are unsure, consult a professional trainer for guidance.
Add New Comment