User Manual Q&AAnswer
Jan 03, 2025 - 08:59 PM
To pair your Rockville EBT35 Magnetic Bluetooth Earbuds with your device, follow these steps:
1. Power on the earbuds by pressing and holding the multi-function button (MFB) until the LED flashes white and red.
2. The earbuds will automatically enter pairing mode. The LED indicator will intermittently flash red and white.
3. On your Bluetooth device, go to the Bluetooth settings and search for available devices.
4. Look for and select "EBT35" from the list of available devices.
5. Once the LED stops flashing and you hear a voice prompt, the pairing process has been successful.
Note: The pairing mode only lasts for 180 seconds. If you miss this window of time, you will need to power off the earbuds and then power them on again to re-enter pairing mode. The earbuds will automatically pair with the last paired device. If you leave the earbuds' effective Bluetooth range, they will automatically repair when you are back in range within 3 minutes. If you are out of range for more than 3 minutes, you will need to turn off the earbuds and then on again to pair.
For more detailed information and troubleshooting tips, please refer to the Rockville EBT35 Magnetic Bluetooth Earbuds Owner's Manual.
Add New Comment