User Manual Q&AAnswer
Jan 03, 2025 - 08:57 PM
To pair your Bluetooth device with the Denon DN-200AZB Compact Amplifier, please follow these steps:
1. Ensure that the DN-200AZB is powered off.
2. Connect the included power adapter to the power input of the DN-200AZB and plug it into a power outlet.
3. Attach the removable Bluetooth antenna to the Bluetooth antenna connector on the DN-200AZB.
4. Press and hold the Pair button on the DN-200AZB for 3 seconds. The Status Light will start flashing quickly, indicating that the DN-200AZB is ready for pairing.
5. On your Bluetooth device (e.g., smartphone), enable Bluetooth and navigate to the Bluetooth settings menu.
6. In the Bluetooth settings menu, search for available devices. You should see "DN-200AZB" listed as an available device.
7. Select "DN-200AZB" from the list of available devices on your Bluetooth device.
8. Once the DN-200AZB successfully pairs with your Bluetooth device, the Status Light will stop flashing and remain solidly lit.
9. You can now play audio from your Bluetooth device, and it will be transmitted to the DN-200AZB's outputs.
Note: If the DN-200AZB does not pair with any device within 20 seconds, it will exit pairing mode. To re-enter pairing mode, press and hold the Pair button for 3 seconds again.
Please refer to the Denon DN-200AZB Compact Amplifier with Bluetooth Receiver Instruction Manual for more detailed information and troubleshooting tips.
Add New Comment