User Manual Q&AAnswer
Jan 03, 2025 - 08:41 PM
To pair your Sylvania SP953 Bluetooth speaker with your device, please follow these steps:
1. Turn on the speaker by pressing and holding the "ON/OFF" button for 2 seconds. The blue LED will start flashing.
2. Put your device (e.g., smartphone) in Bluetooth pairing mode. Refer to your device's user manual for instructions on how to do this.
3. Press the Bluetooth pairing button on the speaker. The unit will enter "Pairing Mode."
4. On your device, search for available Bluetooth devices and select "Sylvania SP953" from the list.
5. Once the speaker and your device are successfully paired, they will automatically reconnect when the speaker is powered on and within range.
If you are still experiencing difficulties, try the following troubleshooting steps:
- Make sure the speaker is within range of your device (approximately 33 feet or 10 meters).
- Ensure that Bluetooth is enabled on your device and that it is not connected to any other Bluetooth devices.
- Restart both the speaker and your device.
- If you have previously paired the speaker with another device, unpair it and try pairing again.
- If the issue persists, refer to the troubleshooting section of the instruction manual or contact Sylvania customer support for further assistance.
Please note that the Bluetooth pairing process may vary slightly depending on your specific device. Refer to your device's user manual for detailed instructions on Bluetooth pairing.
Add New Comment