User Manual Q&AAnswer
Jan 03, 2025 - 08:28 PM
To mount the VocoPro PV-802 speakers on speaker stands, you will need a VocoPro speaker stand adapter (sold separately) and a pair of VocoPro SS-88 speaker stands. Here are the steps to attach the adapter to the speakers and mount them on the stands:
1. Remove the rubber pads covering the xxxx openings on the bottom of the PV-802 speakers to reveal the holes for the mounting screws. Do not remove the xxxx that is already on the bottom of the PV-802 main speaker, as it is keeping the internal amp and mixer in place.
2. Align the slots on the flat part of the adapter with the holes on the bottom of the PV-802 speaker.
3. xxxx in the screws tightly to fasten the adapter to the speaker. Make sure the adapter is attached firmly to the speaker.
4. Set up each SS-88 speaker stand by extending the support legs to a stable position and tightening the tension mechanism firmly.
5. Each end of the SS-88 pole has a particular diameter fitted for common speakers' mounting cavities. If the SS-88 pole does not fit flush into the mounting adapter on the PV-802, loosen the SS-88 pole, reverse it in the stand, and then remount the speaker.
6. Place the PV-802 on the SS-88 speaker pole.
7. Fasten the fastener on the adapter until it is secured tightly.
8. Repeat the above steps for the second speaker.
Please refer to the VocoPro PV-802 (PAIR) Stereo Vocal Speakers Owner's Manual for more detailed instructions and illustrations.
Add New Comment