User Manual Q&AAnswer
Jan 03, 2025 - 08:23 PM
To pair the remote control and receiver for the Saulcy 1 Dog Training Collar, please follow these steps:
1. Charge the remote control: Connect the charger cable to the charging port of the remote control and plug the charger into a standard outlet. The battery icon on the screen will flash, and once fully charged, it will stop flashing.
2. Charge the collar receiver: Open the rubber cover of the receiver's charging hole and connect the charger cable to the charging port. Plug the charger into a standard wall outlet. The indicator light on the receiver will flash until it is fully charged.
3. Pair the remote control and receiver:
a. Turn on the remote control and press the "1/2" button to choose channel 1 for pairing. Make sure the intensity level is set above 01 by pressing the "+" or "-" buttons.
b. Press and hold the power button on the receiver for 3 seconds until you hear a sound like "Bee~" and the indicator light starts flashing quickly.
c. Quickly press the vibration button or static shock button on the remote control within 10 seconds of hearing the sound "Bee~" from the receiver. You will hear another sound "Bee~" indicating successful pairing.
d. If the pairing is not successful, repeat steps 3a to 3c.
e. To pair a second receiver, press the "1/2" button on the remote control to select channel 2 and follow the same procedure.
Once the remote control and receiver are paired, you can turn on both devices and choose the appropriate channel on the remote control for the receiver you want to control. You can then use the beep, vibration, or static shock functions as needed during training sessions.
Please refer to the Saulcy 1 Dog Training Collar user manual for more detailed instructions and additional information on using the product.
Add New Comment