Answer
Jan 03, 2025 - 08:20 PM
To pair the Collar Receiver to the Remote Transmitter, please follow these steps:
1. Power on the Collar Receiver by pressing the ON/OFF button on the Collar Receiver.
2. Press and hold the ON/OFF button for about 3 seconds until a beep sounds, and the indicating light will begin to flash quickly.
3. Press any button on the transmitter once the Collar Receiver beeps. When the Remote Transmitter and Collar Receiver are paired successfully, the indicating light will stop flashing quickly.
4. If you need to pair a second Collar Receiver, follow the same steps but toggle the switch in the other direction.
Please refer to the "Pairing Collar Receiver to Transmitter" section in the user manual for more detailed instructions and illustrations.
Add New Comment