User Manual Q&AAnswer
Jan 03, 2025 - 08:08 PM
To pair the Ausounds AUSANC103-BLACK Wireless In-Ear earbuds with your device, please follow these steps:
1. Make sure the earbuds are charged. It is recommended to charge them for 1 hour prior to the first use.
2. Open the Bluetooth settings on your device.
3. Take both earbuds out of the charging case. They will automatically turn on and enter pairing mode.
4. In the Bluetooth settings on your device, you should see "AU-STREAM ANC+" or a similar name. Select it to connect.
5. Once connected, you should hear a voice prompt or see a notification on your device confirming the successful pairing.
Note: The earbuds will automatically reconnect to your device if they are disconnected due to being out of range. If they are disconnected for more than 7 minutes, they will automatically shut down.
If you encounter any issues with the pairing process, you can try resetting the earbuds. Place the earbuds in the charging case and leave the case open. Press and hold the button on the side of the bottom case for 6 seconds until the LED indicators flash red for 4 times. This should reset the earbuds.
For more detailed instructions and information, please refer to the Ausounds AUSANC103-BLACK Wireless In-Ear Instruction Manual provided with the product.
Add New Comment