User Manual Q&AAnswer
Jan 03, 2025 - 10:59 AM
To connect the Klipsch RP-260F Floorstanding Speaker to your amplifier or receiver, you will need to use 16-12 gauge speaker wire. Follow these steps:
1. Identify the positive (+) and negative (-) terminals on both the speaker and your amplifier or receiver.
2. Using the speaker wire, connect the RED "positive" (+) terminal of the LEFT speaker to the RED "positive" (+) terminal of your amplifier's LEFT channel.
3. Connect the BLACK "negative" (-) terminal of the LEFT speaker to the BLACK "negative" (-) terminal of your amplifier's LEFT channel.
4. Repeat the above steps for connecting all remaining speakers to their appropriate amplifier channels.
5. Make sure that no bare wires from any of the connections touch any other terminals to avoid causing a short and damaging your equipment.
Note: The Klipsch RP-260F Floorstanding Speaker is equipped with dual binding posts. If you are using a single wire connection, the terminal connecting bar should remain in place. If you are using a bi-wire or bi-amp connection, the terminal connecting bar must be removed. Please refer to your receiver's manual for further instructions on bi-wiring or bi-amping.
For more detailed information and illustrations, please refer to Figure 3 in the Klipsch RP-260F Floorstanding Speaker User Guide.
Add New Comment