User Manual Q&AAnswer
Jan 03, 2025 - 10:53 AM
To ensure a proper installation of the PowerBass OE-693 3-Way OEM Replacement Speaker, please follow the steps outlined in the user guide. Here is a summary of the installation process:
1. Preparing for Installation:
- Gather the necessary tools, including an electric drill, screwdrivers, wire strippers, crimping tool, and needle-nose pliers.
- Turn off all stereo and electrical devices and disconnect the negative lead from your vehicle's battery.
- Keep the speakers in the package until final installation.
- Check for enough clearance behind the mounting surface before installing the speakers.
- Use grommets when running speaker wires through sheet metal to insulate them from metal edges.
2. Installation Precautions:
- Only proceed with the installation if you are a qualified installer; otherwise, seek assistance from a PowerBass Autosound dealer.
- Always wear protective eyewear when using tools.
- Check the available mounting depth before installing the speaker.
- Ensure there are no air leaks between the front and back of the speaker after installation.
- Check the clearance of the window and roll-up mechanisms for door installations to avoid any interference with the speaker structure.
3. Wiring Diagram:
- Refer to the provided wiring diagram in the user guide for proper wiring configurations.
- The PowerBass OE-693 3-Way OEM Replacement Speaker features a dual 4-ohm voice coil, which can be wired into two different configurations depending on the impedance requirement of your OEM amplifier.
- Both coils must be wired according to the specified configurations to ensure proper operation of the speaker.
For more detailed instructions and illustrations, please refer to the complete user guide provided with the PowerBass OE-693 3-Way OEM Replacement Speaker.
Add New Comment