User Manual Q&AAnswer
Jan 03, 2025 - 10:51 AM
To connect your Smart 60wi2 Ultra Short Throw 3000 ANSI HDMI Projector to your device, follow these steps:
1. Ensure that both the projector and your device are powered off.
2. Locate the HDMI input port on the projector. It is labeled "HDMI" and is usually located on the back or side panel.
3. Take one end of the HDMI cable and insert it into the HDMI output port of your device. This port is typically found on the side or back of your device and is also labeled "HDMI."
4. Take the other end of the HDMI cable and connect it to the HDMI input port on the projector.
5. Power on both the projector and your device.
6. On the projector's remote control, press the "Source" button to select the HDMI input as the source.
7. Your device's screen should now be displayed on the projector.
Please note that the specific steps may vary slightly depending on your device and the version of the projector. For more detailed instructions and troubleshooting tips, refer to the user guide provided with the Smart 60wi2 Ultra Short Throw 3000 ANSI HDMI Projector.
Add New Comment