User Manual Q&AAnswer
Jan 03, 2025 - 10:38 AM
To install the JVC CS-J620 2-Way Coaxial Car Speakers in your vehicle, please follow the steps below:
1. Disconnect the negative terminal of your vehicle's battery to prevent any electrical short circuits.
2. Remove the existing speakers from your vehicle. This may involve removing screws or clips that hold them in place.
3. Take the JVC CS-J620 speakers out of their packaging and identify the positive (+) and negative (-) terminals on the back of each speaker.
4. Connect the speaker wires from your vehicle's wiring harness to the corresponding terminals on the JVC CS-J620 speakers. Ensure that the positive wire from your vehicle is connected to the positive terminal on the speaker, and the negative wire is connected to the negative terminal.
5. Securely mount the JVC CS-J620 speakers in the speaker openings of your vehicle. Use any provided mounting brackets or screws to ensure a secure fit.
6. Reconnect the negative terminal of your vehicle's battery.
7. Test the speakers by turning on your vehicle's audio system. Adjust the volume and balance settings as needed.
For more detailed instructions and illustrations, please refer to the JVC CS-J620 2-Way Coaxial Car Speakers Owner's Manual. It provides step-by-step installation guidance and additional information on speaker specifications and maintenance.
Add New Comment