User Manual Q&AAnswer
Jan 03, 2025 - 10:32 AM
To connect your Epson VS345 WXGA 3LCD Projector to your computer, you can follow the steps outlined in the instruction manual. Here is a complete answer supported by the manual:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the computer's port and the other end to the projector's port.
4. If you are using a VGA cable, you will also need to connect the audio cable from your computer's audio output to the projector's Audio In port.
5. Once the cables are connected, turn on your computer and projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector (e.g., duplicate, extend, or projector only).
7. Adjust the focus and zoom on the projector as needed.
8. If the projected image does not appear on the screen, press the Source Search button on the projector or use the remote control to select the correct input source.
For more detailed instructions and troubleshooting tips, please refer to the Epson VS345 WXGA 3LCD Projector Instruction Manual provided in the link above.
Add New Comment