User Manual Q&AAnswer
Jan 03, 2025 - 10:01 AM
To connect your BENQ MW526A Digital Projector to your computer, follow these steps:
1. Ensure that both your projector and computer are turned off.
2. Locate the VGA or HDMI port on the back of your projector.
3. Connect one end of the VGA or HDMI cable to the corresponding port on the projector.
4. Locate the VGA or HDMI port on your computer.
5. Connect the other end of the VGA or HDMI cable to the corresponding port on your computer.
6. Turn on your computer and wait for it to fully boot up.
7. Turn on your projector and wait for it to power up.
8. Press the "Source" button on the projector or remote control to select the input source as VGA or HDMI, depending on the cable you used.
9. Adjust the focus and keystone settings on the projector if necessary to ensure a clear and properly aligned image.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with your BENQ MW526A Digital Projector.
Add New Comment