User Manual Q&AAnswer
Jan 03, 2025 - 09:46 AM
To connect your ViviTek D859 DLP Projector to your computer, please follow these steps:
1. Make sure your computer and the projector are both turned off.
2. Locate the VGA or HDMI port on your computer. The VGA port is a blue trapezoid-shaped connector, while the HDMI port is a small rectangular connector.
3. Connect one end of the VGA or HDMI cable (depending on the available ports) to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the back of the projector. It is usually labeled as "Computer In" or "HDMI In."
5. Connect the other end of the VGA or HDMI cable to the corresponding input port on the projector.
6. Turn on your computer and the projector.
7. On the projector's remote control, press the "Source" button to select the input source. Use the arrow keys to navigate to the desired input source (e.g., VGA or HDMI) and press the "Enter" button to confirm.
8. Your computer screen should now be displayed on the projector. Adjust the focus and other settings on the projector as needed.
Please note that if you are using a Mac computer, you may need an adapter to connect the VGA or HDMI cable to your computer, as Mac computers often have different ports. Additionally, some computers may require you to adjust the display settings to enable the external display. You can refer to your computer's user manual or contact the manufacturer for specific instructions on how to do this.
For more detailed information and illustrations, please refer to the ViviTek D859 DLP Projector User Guide, specifically the section on "Connecting the Projector to a Computer" (page 9) in the provided manual.
Add New Comment