User Manual Q&AAnswer
Jan 03, 2025 - 09:27 AM
To connect your Vivitek D925TX DLP Projector to a computer or other devices, follow these steps:
1. Make sure both the projector and the device you want to connect are turned off.
2. Locate the appropriate video output port on your device (e.g., HDMI, VGA, DVI, DisplayPort).
3. Connect one end of the appropriate video cable (HDMI, VGA, DVI, etc.) to the video output port on your device.
4. Locate the corresponding video input port on the back of the projector.
5. Connect the other end of the video cable to the video input port on the projector.
6. If you are using an audio source, locate the audio output port on your device and connect one end of the audio cable to it.
7. Locate the audio input port on the projector and connect the other end of the audio cable to it.
8. Once all the connections are made, turn on both the projector and the device.
9. Use the projector's input source selection function to choose the appropriate input source (e.g., HDMI, VGA, DVI).
10. Adjust the settings on your device, if necessary, to ensure the correct display output.
For more detailed instructions and illustrations, please refer to the Vivitek D925TX DLP Projector Instruction Guide provided in the link above (page 12-15).
Add New Comment