User Manual Q&AAnswer
Jan 03, 2025 - 09:21 AM
To connect your Epson PowerLite 82C LCD Projector to your computer, please follow these steps:
1. Ensure that your computer and projector are turned off.
2. Locate the VGA cable that came with your projector. One end of the cable has a blue connector, and the other end has a white connector.
3. Connect the blue end of the VGA cable to the VGA port on the back of the projector.
4. Connect the white end of the VGA cable to the VGA port on your computer. Make sure to tighten the screws on both ends of the cable for a secure connection.
5. Once the VGA cable is connected, locate the audio cable that came with your projector. It has a green connector on both ends.
6. Connect one end of the audio cable to the Audio Out port on your computer. This port is usually green and labeled with a headphone icon.
7. Connect the other end of the audio cable to the Audio In port on the back of the projector. This port is also green and labeled with a headphone icon.
8. Now, you can turn on your computer and projector.
9. On your computer, go to the display settings and select the appropriate resolution and display mode for the projector. Refer to your computer's user manual for instructions on adjusting display settings.
10. Finally, press the Power button on the projector to turn it on. The projected image should now appear on the screen.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the Epson PowerLite 82C LCD Projector.
Add New Comment