How do I install the Polk Vanishing Series 265-LS In-Wall 3-Way Loudspeaker? (Polk Vanishing Series 265-LS In-Wall 3-Way Loudspeaker User Manual)

Answer

manuals.plus

Jan 03, 2025 - 09:08 AM


To install the Polk Vanishing Series 265-LS In-Wall 3-Way Loudspeaker, follow these steps:

1. Prepare the wall or ceiling surface: If the surface is heavily textured, sand and smooth the area around the speaker cutout to ensure proper seating of the speaker and grille.

2. Take inventory: Make sure you have all the necessary components, including the loudspeaker, speaker cutout mounting template, Sheer-Grille, port plug (if applicable), owner's manual, and registration card.

3. Determine the installation location: Mark the location where you want to install the speaker using a pencil.

4. Cut the wall or ceiling: Use a keyhole saw, utility knife, or appropriate tool to cut a hole according to the provided cutout dimensions.

5. Level the speaker: Use a level to ensure the speaker is installed straight.

6. Secure the speaker: Use a powered screwdriver with a Phillips Head bit to secure the speaker in place.

7. Connect the speaker wire: Connect the speaker wire to the speaker's cable posts located on the rear middle RT of the speaker.

8. Optional: Use the provided port plug if you are installing the speaker in an area larger than a standard open stud bay.

For more detailed instructions and illustrations, please refer to the owner's manual provided with the product.

Note: It is recommended to consult a professional installer if you are unsure about the installation process or if you need to comply with local building and fire codes.