User Manual Q&AAnswer
Jan 03, 2025 - 08:37 AM
To connect your InFocus X2 Multimedia DLP Projector to your computer, follow these steps:
1. Make sure both your projector and computer are turned off.
2. Locate the VGA or HDMI port on your computer. The VGA port is a 15-pin connector, while the HDMI port is a rectangular connector.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI port on the back of your projector.
5. Connect the other end of the VGA or HDMI cable to the corresponding port on your projector.
6. Turn on your computer and wait for it to fully boot up.
7. Turn on your projector and wait for it to warm up.
8. On your computer, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
9. In the display settings, select the option to extend or duplicate your display to the projector. This may vary depending on your operating system.
10. Adjust the projector settings, such as brightness and keystone correction, as needed using the controls on the projector or the remote control.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with your InFocus X2 Multimedia DLP Projector.
Add New Comment