How do I load and play CDs on the Teac PD-D2610mkII Carousel CD Changer? (Teac Carousel CD Changer Remote Owner’s Manual Teac Carousel CD Changer Remote Owner’s Manual)

Answer

manuals.plus

Jan 03, 2025 - 08:19 AM


To load and play CDs on the Teac PD-D2610mkII Carousel CD Changer, follow these steps:

1. Power on the CD changer by pressing the Power button on the front panel or the remote control.

2. Press the Open/Close button on the front panel or the remote control to open the disc tray.

3. Place up to five CDs on the disc tray, with the label side facing up. Make sure to position the CDs within the designated slots.

4. Press the Open/Close button again to close the disc tray.

5. Use the Number buttons on the front panel or the remote control to select the desired CD. For example, press "1" for the first CD, "2" for the second CD, and so on.

6. Press the Play/Pause button on the front panel or the remote control to start playback of the selected CD.

7. Use the Skip Forward and Skip Backward buttons on the front panel or the remote control to navigate between tracks on the CD.

8. Adjust the volume using the Volume control on the front panel or the remote control.

9. To stop playback, press the Stop button on the front panel or the remote control.

10. To remove a CD, press the Open/Close button to open the disc tray, and then carefully lift the CD out of the tray.

Note: The Teac PD-D2610mkII Carousel CD Changer supports various playback modes, such as Repeat, Shuffle, and Program. For detailed instructions on using these features and other advanced functions, please refer to the complete owner's manual provided in the link above.