How do I properly install the Enrock EM265C 2-Way Water-Resistant Marine Loudspeaker? (Enrock EM265C 2-Way Water-resistant Marine Loudspeaker Owner's Manual)

Answer

manuals.plus

Jan 03, 2025 - 06:48 AM

To properly install the Enrock EM265C 2-Way Water-Resistant Marine Loudspeaker, please follow these steps:

1. Always consult with a qualified installer to ensure proper installation.
2. Use only the installation parts provided with the speaker.
3. The speakers have a weather-resistant design, but they should not be submerged in or under water under any circumstances.
4. When wiring directly to the vehicle's battery, be sure to disconnect the battery's negative terminal wire before starting any wiring procedures. If extending the main power wire, it is recommended to use an optional fuse and fuse holder (not included) with a minimum rating of 10 Amperes in-line with the positive battery terminal.
5. The ground cable length should not exceed 18 inches.
6. Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without professional training and experience in electronic equipment and motorized vehicle accessories may be dangerous and could expose you to the risk of electric shock, injury, or other hazards.
7. Properly seal connections to ensure water-tight connections.
8. Secure all wiring with wire ties.
9. Do not touch the speaker flex wire.
10. Prior to installing this product, disconnect the (-) battery cable to avoid potential shorts in the electrical system. Use this unit with a 12-volt battery and negative grounding only.
11. When replacing the fuse, use a fuse of the rating specified on the product.
12. To avoid short-circuiting, cover any disconnected leads with insulating tape. Insulate any unused wires to prevent a short circuit. When connecting other devices to this product, refer to the manual for the product to be connected. Connect the ground wire first.
13. Ensure that the ground cable is properly connected to metal parts of the vehicle's body frame or directly to the battery if the vehicle does not have a grounded chassis frame. The ground cable of this unit's power amp and a second powered system must be connected to the frame separately with different screws.

Please refer to the Enrock EM265C 2-Way Water-Resistant Marine Loudspeaker Owner's Manual for more detailed instructions and illustrations on the installation process.