How do I install the Rockford Fosgate TMS5 Power Harley Full Range Fairing Speakers on my motorcycle? (Rockford Fosgate TMS5 Power Harley Full Range Fairing Speakers User Guide)

Answer

manuals.plus

Jan 03, 2025 - 06:42 AM


The installation process for the Rockford Fosgate TMS5 Power Harley Full Range Fairing Speakers may vary depending on the specific model of your Harley-Davidson motorcycle. However, here is a general overview of the installation steps:

1. Fairing Removal: Remove the screws below the windshield to remove the windshield. Then, remove the remaining screws on the inside of the fairing to remove the front fairing. Disconnect the harness from the headlight to completely take off the fairing.

2. Speaker Removal: After removing the fairing, unplug the wires from both speaker terminals. Remove the screws that secure the factory speaker and grille to the fairing. Remove each speaker and grille from the fairing.

3. Speaker Installation: Insert the new Rockford speaker and grille assembly into the fairing opening with the wire terminals facing up. Use the included screws to securely mount the speakers to the fairing. Connect the speakers by sliding the speaker wire connectors over the speaker terminals. The smaller terminal is the positive (+) and the larger terminal is the negative (-).

For more detailed instructions and illustrations specific to your Harley-Davidson model, please refer to the Rockford Fosgate TMS5 Power Harley Full Range Fairing Speakers User Guide. It provides step-by-step installation instructions, along with diagrams and additional information to ensure a successful installation.