User Manual Q&AAnswer
Jan 03, 2025 - 06:37 AM
To install the Enrock EM602W marine speakers, please follow these steps:
1. Disconnect the negative battery terminal for safety.
2. Use caution when drilling holes to avoid damaging fuel lines, hydraulic lines, or existing wiring.
3. If additional wiring is needed, it is recommended to run all wires before mounting the speakers.
4. Use high-quality connectors for a proper installation and to reduce signal and power loss.
5. Use rubber grommets to protect any wires routed through metal and avoid sharp edges.
6. Decide where you want to mount the speakers, ensuring the surrounding area is large enough and deep enough for proper installation.
7. Using a utility knife, cut a 5.13-inch diameter mounting hole.
8. Use the speaker as a template to outline the locations for the mounting screws.
9. Route the speaker wires and connect them to the speakers, noting the speaker polarity.
10. Install the speaker into the opening and fasten it with a power drill.
For more detailed instructions and illustrations, please refer to the Enrock EM602W Weather Resistant Full Range Marine Speaker Owner's Manual provided with the product.
Note: It is always recommended to read and familiarize yourself with the manual before starting the installation process to ensure proper installation and avoid any potential issues.
Add New Comment