User Manual Q&AAnswer
Jan 03, 2025 - 06:34 AM
To connect the Fusion XS-S10SPGW marine subwoofer to your amplifier or source, follow these steps:
1. Ensure that the audio system is turned off before making any connections.
2. Use a 20 AWG (0.52 mm2) speaker wire to connect the subwoofer to the amplifier or source. The speaker wire is not included with the subwoofer.
3. The leads on the subwoofer are terminated using male spade connectors. Use female spade connectors (not included) to connect the speaker wire to the speaker leads for the best connection.
4. The subwoofer features a dual 2 Ohm voice coil that can be configured for 2.1 operations (two speakers and one subwoofer) when connected to a FUSION stereo with DSP capability.
5. Use the following table to identify the polarity of the leads on the speaker:
- White: Positive (+)
- Gray with a black stripe: Negative (-)
6. Connect the speaker wire to the corresponding terminals on the subwoofer, observing polarity.
7. If necessary, connect the LED wires to the subwoofer. This feature is available only on the sports model.
8. Once the connections are made, place the subwoofer in the designated mounting location and secure it using the included screws.
9. Finally, snap the grille into place on the subwoofer.
By following these steps, you should be able to successfully connect the Fusion XS-S10SPGW marine subwoofer to your amplifier or source. For more detailed instructions and illustrations, refer to the installation instructions provided in the product manual.
Add New Comment