User Manual Q&AAnswer
Jan 03, 2025 - 06:00 AM
To connect your Epson PowerLite 85+ Multimedia Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system, but it is usually found in the Control Panel or System Preferences.
7. Adjust the projector settings if necessary. You can refer to the Epson PowerLite 85+ Multimedia Projector User's Guide for detailed instructions on adjusting settings such as brightness, contrast, and keystone correction.
Please note that if you are using a Mac computer, you may need to use an adapter to connect the VGA or HDMI cable to your computer's Thunderbolt or USB-C port.
For more detailed instructions and troubleshooting tips, you can refer to the Epson PowerLite 85+ Multimedia Projector User's Guide provided in the link above.
Add New Comment