User Manual Q&AAnswer
Jan 03, 2025 - 05:49 AM
To pair the Collar Receiver to the Remote Transmitter, please follow these steps:
1. Ensure that both the Collar Receiver and Remote Transmitter are fully charged before starting the pairing process.
2. Power on the Remote Transmitter by rotating the Intensity Dial so it's no longer selecting "off." The Transmitter Indicator Light should start flashing green.
3. Rotate the Receiver Selector Dial on the Remote Transmitter to select the receiver you want to pair (1, 2, or 3).
4. Make sure the Collar Receiver is turned off. If it's already on, hold the Vibration Button 1 first and then press and hold the Beep Button 1 for 3 seconds to turn it off.
5. Align the Remote Transmitter Pairing Symbol with the corresponding Collar Receiver Pairing Symbol. Hold them together until the Receiver Indicator Light on the Collar Receiver turns a steady green.
6. Once the steady green light begins to flash, press any of the stimulation buttons on the Remote Transmitter. This will complete the pairing process.
7. If you need to pair additional Collar Receivers, repeat the above steps but rotate the Receiver Selector Dial to the corresponding receiver number (2 or 3) before aligning the Pairing Symbols.
Please refer to the user manual for visual references and additional information on the pairing process.
Add New Comment