User Manual Q&AAnswer
Jan 03, 2025 - 05:41 AM
To change the static stimulation range on the SportDOG Brand SportHunter 825X Remote Trainer, follow these steps:
1. Make sure the Collar Receiver is turned off.
2. Turn on the Collar Receiver by pressing and releasing the On/Off Button. The Receiver Indicator Light will come on and the Collar Receiver will beep 1-2 times.
3. Within 5 seconds of the Receiver Indicator Light turning off, press and hold the On/Off Button for 3 seconds.
4. The Collar Receiver will beep and the Indicator Light will flash orange.
5. Continue to hold the button until the number of beeps/orange flashes equals the desired stimulation range. Refer to the chart in the manual for the number of beeps/flashes corresponding to each range.
6. Release the button once the desired range is selected. The Collar Receiver will turn off.
7. Turn on the Collar Receiver again to activate the new static stimulation range. It will beep according to the range selected.
Please note that the static stimulation range can be adjusted to low, medium, or high levels, depending on your dog's temperament and training needs. Always start at the lowest level and work your way up to find the appropriate range for your dog.
Add New Comment