User Manual Q&AAnswer
Jan 03, 2025 - 05:35 AM
To set the date and time on the Bushnell DS-4K Core No-Glow Trail Camera, follow these steps:
1. Make sure the camera power switch is in the OFF position.
2. Install 6 AA batteries (lithium or alkaline, lithium batteries are recommended).
3. Make sure the write-protect switch on the side of the SD card is "OFF" (not in the "Lock" position).
4. Insert the SD card (up to 512GB max). Make sure it is inserted properly by listening for a "click" sound.
5. Switch the power ON.
6. The camera will prompt you to set the date and time. Use the arrow buttons to navigate and the OK button to select.
7. Set the hour (24-hr format only, "00"=midnight, "12"=noon), minute, year, month, and date.
8. Press the OK button to save the settings.
Note: It is recommended to spend some time indoors with the camera and the user manual to familiarize yourself with the settings menu and functions before using it outdoors. For further assistance, you can also contact Bushnell Customer Service at 800-423-3537.
Add New Comment