User Manual Q&AAnswer
Jan 03, 2025 - 05:20 AM
To balance your camera on the DJI RS 3 Gimbal Stabilizer, please follow these step-by-step instructions:
1. Mount the gimbal on a stable surface, such as a tripod or table, ensuring it is powered off.
2. Loosen the tilt axis lock xxxx and roll axis lock xxxx .
3. Adjust the sliding plate to accommodate the size and weight of your camera. The sliding plate should be positioned so that the camera's center of gravity is aligned with the gimbal's tilt axis.
4. Attach the camera to the sliding plate using the camera mounting xxxx . Make sure the camera is securely fastened.
5. Power on the gimbal and wait for it to initialize.
6. Use the tilt axis adjustment xxxx to adjust the tilt balance. The camera should stay level when the tilt axis is unlocked and the gimbal is held upright.
7. Use the roll axis adjustment xxxx to adjust the roll balance. The camera should stay level when the roll axis is unlocked and the gimbal is held upright.
8. Use the pan axis adjustment xxxx to adjust the pan balance. The camera should stay level when the pan axis is unlocked and the gimbal is held upright.
9. Once the camera is balanced, tighten the tilt axis lock xxxx , roll axis lock xxxx , and pan axis lock xxxx to secure the adjustments.
10. Power off the gimbal and remove it from the stable surface.
Please refer to the DJI RS 3 Gimbal Stabilizer User Manual for more detailed instructions and illustrations. You can find the manual at the following link: [DJI RS 3 Gimbal Stabilizer User Manual](https://manuals.plus/wp-content/uploa...)
Note: It may take some trial and error to achieve the perfect balance, especially if you are using different camera setups. Take your time and make small adjustments until the camera remains stable and level in all axes.
Add New Comment