User Manual Q&AAnswer
Jan 03, 2025 - 05:10 AM
To connect a microphone to the Pyle PT510 Audio Power Amplifier, follow these steps:
1. Locate the MIC1 or MIC2 volume control on the front panel of the amplifier.
2. Plug your microphone into the corresponding 1/4" input jack on the rear panel of the amplifier. MIC1 is for the first microphone, and MIC2 is for the second microphone.
3. Adjust the volume control for the microphone you are using to the desired level.
Note: The Pyle PT510 Audio Power Amplifier can accommodate up to two microphones simultaneously. Make sure to use microphones with 6.35mm plugs for proper compatibility.
For more detailed instructions and illustrations, please refer to the "Features and Controls" section and the "Installation Guidelines" section of the Pyle PT510 Audio Power Amplifier Instruction Guide.
Add New Comment