User Manual Q&AAnswer
Jan 03, 2025 - 05:06 AM
To set up the SPYPOINT Flex Dual-Sim Cellular Trail Camera for cellular use, please follow the steps below:
1. Insert SIM Cards: Open the camera's SIM card slot cover and insert two compatible SIM cards. Ensure that the SIM cards are properly inserted and that they have an active cellular plan with data.
2. Power On the Camera: Press and hold the Power button until the camera's LED lights up. The camera will go through a startup sequence.
3. Configure Camera Settings: Once the camera is powered on, you need to configure the camera settings. Press the Menu button to access the main menu. Use the Up and Down buttons to navigate through the menu options, and the OK button to select an option.
4. Set Cellular Parameters: In the main menu, select "Settings" and then "Cellular." Here, you can set the APN (Access Point Name) for your cellular provider. Consult your cellular provider or refer to the manual for the correct APN settings.
5. Activate Cellular Mode: In the "Cellular" menu, select "Cellular Mode" and choose either "Standard" or "Advanced" mode. The "Standard" mode allows you to send photos and receive status updates, while the "Advanced" mode provides additional features like remote control and live view.
6. Configure Transmission Settings: In the "Cellular" menu, select "Transmission" to configure the transmission settings. Here, you can set the transmission schedule, image resolution, and other parameters. Adjust these settings according to your preferences and data plan limitations.
7. Test Cellular Connection: After configuring the settings, select "Test Cellular" in the "Cellular" menu to check the cellular connection. The camera will attempt to connect to the cellular network and display the signal strength. If the connection is successful, you should see the network name and signal bars on the camera's display.
8. Mount and Secure the Camera: Choose a suitable location for the camera and mount it securely using the provided mounting strap or bracket. Ensure that the camera has a clear view of the area you want to monitor.
9. Activate the Camera: Once the camera is mounted, activate it by pressing the Power button. The camera will start capturing photos or videos based on the configured settings and transmit them over the cellular network.
Please note that the above steps are a general guide, and the specific instructions may vary depending on the model and firmware version of your SPYPOINT Flex Dual-Sim Cellular Trail Camera. For detailed instructions and troubleshooting tips, refer to the user guide provided with the camera.
Add New Comment