How do I set up the Godox XProS TTL Wireless Flash Trigger for Sony Cameras? (Godox XProS TTL Wireless Flash Trigger User Manual)

Answer

manuals.plus

Jan 03, 2025 - 04:48 AM


To set up the Godox XProS TTL Wireless Flash Trigger for Sony Cameras, follow these steps:

1. Install Batteries: Slide the battery compartment lid and insert two AA batteries separately.

2. Power On: Slide the Power Switch to ON.

3. Channel Setting: Long press the  button and turn the select dial to choose the appropriate channel. Press the  button to confirm the setting. Make sure the transmitter and receiver are set to the same channel.

4. Wireless ID Settings: Press the

button and enter C.Fn ID. Press the button to choose OFF channel expansion shutdown, and choose any figure from 01 to 99.5. Mode Setting: Short press the button to change the mode of the current group. Set the groups to five groups (A-E) or 16 groups (0-F) depending on your needs.6. Flash Exposure Control: Use the group button to choose the group, turn the select dial, and change the flash exposure compensation value from -3 to +3 in 0.3 stop increments.7. Other Settings: You can also adjust settings for modeling lamp, zoom value, shutter sync, beep, sync socket, TCM function, and more. Refer to the manual for detailed instructions on each setting.8. Using the Flash Trigger: Depending on your usage scenario, follow the instructions provided in the manual for using the flash trigger as a wireless camera flash trigger, wireless outdoor flash trigger, wireless original flash trigger, or wireless studio flash trigger.Please refer to the Godox XProS TTL Wireless Flash Trigger for Sony Cameras User Manual for more detailed instructions and information on each setting and function.

Source: https://manuals.plus/godox/godox-xpro...