User Manual Q&AAnswer
Jan 03, 2025 - 04:47 AM
button to enter C.Fn ID. Press the button to choose OFF for channel expansion shutdown, and choose any figure from 01 to 99 for the wireless ID. 5. Mode Setting: Short press the button to change the mode of the current group. Set the groups to five groups (A-E) or 16 groups (0-F) depending on your needs. Long press the button for 2 seconds to lock or unlock the screen. 6. Output Value Settings: Use the select dial to change the power output value in M mode or the flash exposure compensation (FEC) value in TTL mode. Press the button to confirm the setting. 7. Other Settings: You can also adjust settings such as modeling lamp control, zoom value, shutter sync, beep settings, sync socket settings, TCM function, shoot function settings, and more. Refer to the manual for detailed instructions on these settings. 8. Compatibility: The Godox Xpro-C TTL Wireless Flash Trigger is compatible with various Canon EOS cameras and Godox flashes. Refer to the manual for a list of compatible camera models and flashes. Please note that these are general setup instructions. For specific details and step-by-step instructions, refer to the Godox Xpro-C TTL Wireless Flash Trigger for Canon User Manual.
To set up the Godox Xpro-C TTL Wireless Flash Trigger for Canon, follow these steps:
1. Install Batteries: Slide the battery compartment lid of the flash trigger and insert two AA batteries separately.
2. Power On: Slide the Power Switch to ON to turn on the flash trigger.
3. Channel Setting: Long press the button and use the select dial to choose the appropriate channel. Press the button to confirm the setting. Make sure the transmitter and receiver are set to the same channel.
4. Wireless ID Settings: Press the
Add New Comment