How do I set up the Covert MP16 Trail Camera Mossy Oak? (Covert MP16 Trail Camera Mossy Oak User Manual)

Answer

manuals.plus

Jan 03, 2025 - 04:36 AM


To set up the Covert MP16 Trail Camera Mossy Oak, follow these steps:

1. Insert Batteries: Open the battery compartment located on the bottom of the camera. Insert 8 AA batteries following the polarity markings inside the compartment.

2. Insert SD Card: Open the SD card slot located on the side of the camera. Insert a compatible SD card (up to 32GB) into the slot with the label facing up.

3. Power On: Press and hold the Power button located on the front of the camera for a few seconds until the display turns on.

4. Configure Settings: Use the Up and Down buttons to navigate through the menu options on the display. Press the OK button to enter a menu or select an option. Use the Up and Down buttons to adjust the settings as desired.

5. Set Date and Time: In the Setup menu, select "Time/Date" and press OK. Use the Up and Down buttons to set the correct date and time. Press OK to confirm.

6. Mount the Camera: Choose a suitable location for mounting the camera. Ensure it is securely attached to a tree or other stable surface using the provided strap or mounting bracket.

7. Test the Camera: After mounting, walk in front of the camera to test the detection and capture capabilities. Review the captured images or videos to ensure they meet your expectations.

For more detailed instructions and additional settings, please refer to the Covert MP16 Trail Camera Mossy Oak User Manual provided in the link you provided.