User Manual Q&AAnswer
Jan 03, 2025 - 04:02 AM
To pair your PYLE PWPBT30GN Bluetooth Water Resistant speaker with your smartphone, please follow these steps:
1. Turn on the speaker by pressing and holding the power button until it powers on.
2. The speaker will enter automatic pair status, indicated by the blue LED indicator blinking fast a few times and then blinking slowly (approximately every 5 seconds).
3. On your smartphone, go to the Bluetooth settings and enable Bluetooth.
4. Search for the device name "PWPBT30" in the list of available devices.
5. Select the PWPBT30 device from the list to initiate the pairing process.
6. Once the pairing is successful, the LED indicator on the speaker will light up around every 3 seconds.
7. You can now play music or make phone calls through the speaker using your smartphone.
If the automatic pairing process doesn't work, you can try the manual pairing method:
1. Make sure the speaker is turned on and in Bluetooth mode.
2. Press and hold the button on the speaker until the LED indicator blinks fast.
3. On your smartphone, go to the Bluetooth settings and enable Bluetooth.
4. Search for the device name "PWPBT30" in the list of available devices.
5. Select the PWPBT30 device from the list to initiate the pairing process.
6. Once the pairing is successful, the LED indicator on the speaker will light up around every 3 seconds.
If you are still experiencing difficulties with the pairing process, please refer to the user manual for further troubleshooting steps or contact the manufacturer's customer support for assistance.
Add New Comment