User Manual Q&AAnswer
Jan 03, 2025 - 03:59 AM
To charge the ISOUND-5464 DuraWaves Bluetooth Speaker, follow these steps:
1. Plug one end of the included USB charge cable into the rear of the DuraWaves speaker.
2. Plug the other end of the USB cable into a powered USB port, such as on a computer or USB AC adapter.
3. During charging, a red LED indicator will turn on. Once fully charged, the LED indicator will turn off.
4. For optimal battery maintenance, it is recommended to unplug the USB cable after the speaker is fully charged.
5. If the power is low (below 21%), the red LED indicator will also light up, accompanied by a charge indicating sound.
Note: If you need a USB AC adapter or car charger, you can visit www.isound.com and search for item numbers: ISOUND-2102 or ISOUND-2104.
Add New Comment