User Manual Q&AAnswer
Jan 03, 2025 - 03:48 AM
To pair the JENSEN SMPS-626 Waterproof Bluetooth Shower Speaker with your iPhone, follow these steps:
1. Turn on the speaker by pressing and holding the POWER / LIGHT MODE BUTTON (#3) until you hear a voice prompt confirming the power is on.
2. The speaker will enter Bluetooth pairing mode, indicated by a flashing blue light ring. If it doesn't automatically enter pairing mode, tap the POWER / LIGHT MODE BUTTON (#3) once to enter pairing mode.
3. On your iPhone, go to the Settings menu and select Bluetooth.
4. Make sure Bluetooth is turned on, and your iPhone will start scanning for available devices.
5. In the list of available devices, you should see "SMPS-626" or a similar name. Select it to initiate the pairing process.
6. If prompted, enter the passcode "0000" to complete the pairing process.
7. Once the pairing is successful, you will hear a confirmation tone from the speaker.
8. Now you can start streaming music from your iPhone to the JENSEN SMPS-626 Waterproof Bluetooth Shower Speaker. Adjust the volume using the VOLUME +/- BUTTONS (#7/6) on the speaker.
Note: If you want to connect the SMPS-626 to another iPhone or device after pairing successfully, you can press and hold the PLAY/PAUSE BUTTON (#4) to set the speaker to pairing mode again.
For more detailed instructions and troubleshooting tips, refer to the JENSEN SMPS-626 Waterproof Bluetooth Shower Speaker User Guide.
Add New Comment