User Manual Q&AAnswer
Jan 03, 2025 - 03:18 AM
To charge the battery pack for the Midland XT600 Series 36 Channel FRS Radio, you have two options: using the AC adapter or a desktop charger. Here are the steps for each method:
1. Using the AC Adapter:
- Place the rechargeable battery packs in the radios.
- Connect the AC adapter into an AC wall outlet.
- Insert the AC adapter plug into the radio charge jack.
- The LED indicator on the desktop charger will light up in red, indicating the charging function.
- For the initial charge, leave the radios in the charger for 24 hours. For subsequent charges, charge for about 12 hours.
- Remove the radios from the charger when the charge time expires.
2. Using a Desktop Charger:
- Place the rechargeable battery packs in the radios.
- Insert the AC adapter plug (or DC Cigarette Lighter adapter if charging in a vehicle) into the desktop charger jack.
- Place the radios into the desktop charger slot.
- The LED indicator on the desktop charger will light up in red, indicating the charging function.
- For the initial charge, leave the radios in the charger for 24 hours. For subsequent charges, charge for about 12 hours.
- Remove the radios from the charger when the charge time expires.
Important Notes:
- Only use the provided NiMH battery pack and AC adapter for charging.
- Do not attempt to charge alkaline batteries or any batteries other than the one indicated in the manual, as it may cause damage to the radio.
- For long-term storage of the radio, turn it off and remove the batteries.
Please refer to the Midland XT600 Series 36 Channel FRS Radio Owner's Manual for more detailed instructions and safety precautions.
Add New Comment