User Manual Q&AAnswer
Jan 03, 2025 - 03:16 AM
To connect the propane tank to the UKIAH TK-1003-L Loom Music Fire Pit Table, please follow these steps:
1. Make sure the control gas xxxx on the fire pit is turned to the "OFF" position by pushing it in and turning it clockwise.
2. Turn off the propane cylinder valve by turning it clockwise.
3. While holding the carrying handle closest to the propane cylinder, connect the regulator to the propane cylinder by screwing it on clockwise until snug. Do not over-tighten.
4. Attach the quick-connect on the opposite end of the regulator hose to the fire pit.
5. Once the connections are secure, turn on the propane cylinder valve by turning it counterclockwise.
6. Check for any gas leaks by preparing a soap solution of one-part water and one-part liquid detergent. Brush the soap solution on each connection and along the hose. If you see bubbles forming, there is a gas leak. In this case, close the propane cylinder valve, tighten the connection, and retest for leaks.
7. Once you have confirmed that there are no gas leaks, you can proceed to light the fire pit following the lighting instructions in the manual.
Please refer to the "Regulator Connections" section of the user manual for more detailed instructions and safety precautions.
Add New Comment