User Manual Q&AAnswer
Jan 03, 2025 - 03:13 AM
To pair your Skullcandy S6EVW Crusher Evo Wireless Headphones with a new device, follow these steps:
1. Power on the headphones by pressing and holding the power button until you hear a power-on tone.
2. Make sure the headphones are in pairing mode. If they are not, press and hold the power button for 5 seconds until you hear a pairing tone.
3. On your device, go to the Bluetooth settings and turn on Bluetooth.
4. Look for the device named "Crusher EVO" in the list of available devices and select it.
5. Once connected, you will hear a pairing confirmation tone in the headphones.
If you are still unable to pair your headphones with your device, make sure that the headphones are within range of the device and that there are no other devices nearby that may be interfering with the Bluetooth connection. You can also try resetting the headphones by holding the power button for 10 seconds until you hear a reset tone, and then repeat the pairing process.
For more detailed instructions and troubleshooting tips, refer to the user guide provided with your Skullcandy S6EVW Crusher Evo Wireless Headphones.
Add New Comment